Brief Introduction
M160 module is our self-developed LoRa module. It is integrated with LoRaWAN protocol stack, compatible with LoRaWAN specification (V1.0.3, Class A/B/C) released by LoRa Alliance, which supports the connectivity function for different end devices. The module can support wide frequency band 470~510MHz or 862~923MHz. With UART interface to interchange data or command, M160 provides an easy way to access LoRaWAN network and explore wireless data applications. M160 has many features as low power, long range and high anti-interference etc, which can be used in many applications as smart metering, smart city and smart building etc。
Features
• Low power consumption: minimum standby current 1.5uA
• High sensitivity: reach -139dBm@SF12/125KHz
• Anti-interference: high performance spread spectrum communication with efficient cycle interleaved error correction
• Compliant with LoRaWAN Specification 1.0.3
• On-board LoRaWAN Class A/B/C protocol stack
• UART interface, stamp hole, support parameters configuration through AT command
Applications
Specification
Specification
|
Description |
|
Model |
Model |
M160 |
Transmission |
Protocol |
LoRaWAN V1.0.3 |
Topology |
Star |
|
Device Type |
Class A/B/C |
|
Activation Mode |
OTAA/ABP |
|
Modulation |
CSS (Chirp Spread Spectrum) |
|
Frequency Band |
470MHz/510MHz/868MHz/915MHz/923MHz |
|
Center Frequency |
Can be customized |
|
Bandwidth |
125/250/500KHz configurable |
|
Data Rate |
0.018-37.5kbps |
|
RX Power |
+19dBm (max) |
|
TX Sensitivity |
-139dBm@SF12/125KHz |
|
Interface |
Supply Voltage |
DC 3.3V (2.0-3.6V) |
IOs |
GPIO*4, UART*1, I2C*1 (Reserved) |
|
Baud Rate Of Serial Port |
1200/2400/4800/9600/19200/38400/57600/115200bps, default is 9600bps |
|
Antenna Type |
Omni directional or Directional (Spring Antenna is recommended) |
|
Pin Encapsulation |
Stamp hole |
|
Dimension |
15.5(L)*15(W)*2.5(H)mm (SMA connector not included) |
|
Others |
Operating Environment |
-40℃--85℃, 10%--90%RH |
Storage Environment |
-40℃--105℃, 5%--95%RH |