Brief Introduction
M190 series LoRaWAN module is integrated with LoRaWAN protocol stack, compatible with LoRaWAN specification (V1.0.2, Class A/C) released by LoRa Alliance, which supports the connectivity function for different devices. The module can support wide frequency:low band 470~510MHz or high band 862~932MHz.
M190 module uses ST® SOC STM32WLE5xx chip(integrated with LoRa SX1262 chip),has many features as low power, long range and high anti- interference etc, which can be used in many applications as smart metering, smart city and smart building etc。
Features
• Low power consumption: minimum standby current 3.5uA
• High sensitivity: up to -139dBm@SF12/125KHz
• High sensitivity: up to -139dBm@SF12/125KHz
• Support LoRaWAN Class A/B/C with integration of LoRaWAN protocol stack
• UART interface, stamp hole, support parameters configuration through AT command
Applications
Specification
Specification
|
Description |
|
Model |
Model |
M120 |
Transmission |
Protocol |
LoRaWAN V1.0.2 |
Topology |
Star |
|
Device Type |
Class A/Class C |
|
Activation Mode |
OTAA/ABP |
|
Modulation |
CSS (Chirp Spread Spectrum) |
|
Frequency Band |
470MHz/510MHz/868MHz/915MHz/923MHz |
|
Center Frequency |
Can be customized |
|
Bandwidth |
125/250/500KHz configurable |
|
Data Rate |
0.018-37.5kbps |
|
RX Power |
+19dBm (max) |
|
TX Sensitivity |
-139dBm@SF12/125KHz |
|
Interface |
Supply Voltage |
DC 3.3V (2.0-3.6V) |
IOs |
GPIO*4, UART*1, I2C*1 (Reserved) |
|
Baud Rate Of Serial Port |
1200/2400/4800/9600/19200/38400/57600/115200bps, default is 9600bps |
|
Antenna Interface |
IPEX base/Stamp hole, default is IPEX base |
|
Antenna Type |
Omni directional or Directional (Spring Antenna is recommended) |
|
Pin Encapsulation |
Stamp hole |
|
Dimension |
15.5(L)*15(W)*2.5(H)mm (SMA connector not included) |
|
Others
|
Operating Environment |
-40℃--85℃, 10%--90%RH |
Storage Environment |
-40℃--105℃, 5%--95%RH |