Brief Introduction M100 series module is based on LoRa spread spectrum modulation technology, providing TTL serial port and GPIO, built-in LoRaWAN protocol. The end products embedded in this module can be configured in a quick and easy way, with the gateways forming a star low power WAN (LPWAN) for ultra-long distance wireless data transmission。       Features • Low power consumption: minimum standby current 3.5uA • High sensitivity: up to -143dBm@SF12/125KHz • Compliant with LoRaWAN Specification 1.0.2 • Support LoRaWAN Class A/C with integration of LoRaWAN protocol stack • UART interface, stamp hole, support parameters configuration through AT command     Applications       Specification   Model M100 Size 32*19*2.5mm(Without SMA connector) Modulation technology Linear FM Spread Spectrum Modulation CSS（chirp Spread Spectrum） Center frequency customizable Working frequency 433MHz/470MHz/510MHz/868MHz/915MHz/923MHz; Channel bandwidth 125KHz,250KHz configurable Transmission rate 0.25-50kbps RF power 20dBm（max） Receiving sensitivity -143dBm@SF12/125KHz Protocol LoRaWAN V1.0.2 Power consumption Standby 5μA@5V/3.5μ[email protected]（Class A）/10mA（Class C）； TX：130mA；RX：10 mA Operating Voltage DC3.3V（2.6-3.6V） Coverage city 2km，suburbs  5km IO interface GPIO*3、Serial port *2 （3.3V）、PIN gap 2.54mm Antenna interface SMA Connector pad / Stamp hole pad / Through hole pad Antenna Omnidirectional / Directional, Recommended Spring Antenna, Headroom Operating temperature -40℃--85℃ Working humidity 10%--90%RH（No condensation）                                      

Brief Introduction M190 series LoRaWAN module is integrated with LoRaWAN protocol stack, compatible with LoRaWAN specification (V1.0.2, Class A/C) released by LoRa Alliance, which supports the connectivity function for different devices. The module can support wide frequency:low band 470~510MHz or high band 862~932MHz. M190 module uses ST® SOC STM32WLE5xx chip(integrated with LoRa SX1262 chip),has many features as low power, long range and high anti- interference etc, which can be used in many applications as smart metering, smart city and smart building etc。       Features • Low power consumption: minimum standby current 3.5uA • High sensitivity: up to -139dBm@SF12/125KHz • High sensitivity: up to -139dBm@SF12/125KHz • Support LoRaWAN Class A/B/C with integration of LoRaWAN protocol stack • UART interface, stamp hole, support parameters configuration through AT command     Applications       Specification     Specification   Description Model Model M120 Transmission Protocol LoRaWAN V1.0.2 Topology Star Device Type Class A/Class C Activation Mode OTAA/ABP Modulation CSS (Chirp Spread Spectrum) Frequency Band 470MHz/510MHz/868MHz/915MHz/923MHz Center Frequency Can be customized Bandwidth 125/250/500KHz configurable Data Rate 0.018-37.5kbps RX Power +19dBm (max) TX Sensitivity -139dBm@SF12/125KHz Interface Supply Voltage DC 3.3V (2.0-3.6V) IOs GPIO*4, UART*1, I2C*1 (Reserved) Baud Rate Of Serial Port 1200/2400/4800/9600/19200/38400/57600/115200bps, default is 9600bps Antenna Interface IPEX base/Stamp hole, default is IPEX base   Antenna Type Omni directional or Directional (Spring Antenna is recommended) Pin Encapsulation Stamp hole Dimension 15.5(L)*15(W)*2.5(H)mm (SMA connector not included） Others   Operating Environment -40℃--85℃, 10%--90%RH Storage Environment -40℃--105℃, 5%--95%RH      

Brief Introduction M130 series LoRaWAN module is integrated with LoRaWAN protocol stack, compatible with LoRaWAN specification (V1.0.2, Class A/C) released by LoRa Alliance, which supports the connectivity function for different devices. The module can support wide frequency:low band 470~510MHz or high band 862~932MHz. The module uses a TTL serial port for data/command interaction with external devices, which can easily provide users with fast LoRaWAN network access and wireless data service applications. M130 module has low power consumption, long transmission distance, and strong anti-interference ability, and is suitable for a variety of applications: IoT low-power terminal applications, automatic meter reading, smart cities, industrial automation, smart homes, etc。       Features • Low power consumption: minimum standby current 1.5uA • High sensitivity: up to -139dBm@SF12/125KHz • Compliant with LoRaWAN Specification 1.0.2 • Support LoRaWAN Class A/C with integration of LoRaWAN protocol stack • UART interface, stamp hole, support parameters configuration through AT command     Applications       Specification     Specification Description Appearance Model M130                   Transmission                     Protocol LoRaWAN V1.0.2 Topology Star Device Type Class A/C Activation Mode OTAA/ABP Modulation CSS (Chirp Spread Spectrum) Frequency Band EU433MHz/CN470MHz/EU868MHz/US915MHz/AS923MHz Center Frequency Can be customized Bandwidth 125/250/500KHz configurable Data Rate 0.018-37.5kbps Transmit Power +20dBm (max)on PA_BOOST（max） TX Sensitivity -139dBm@SF12/125KHz           Interface             Supply Voltage DC 3.3V (2.0-3.6V) IOs GPIO*4, UART*1, I2C*1 (Reserved) Baud Rate Of Serial Port 1200/2400/4800/9600/19200/38400/57600/115200bps, default is 9600bps Antenna Interface   IPEX base/Stamp hole, default is IPEX base Antenna Type Omni directional or Directional (Spring Antenna is recommended) Pin Encapsulation Stamp hole Dimension 15.5(L)*15(W)*2.5(H)mm (SMA connector not included） Others Operating Environment -40℃--85℃, 10%--90%RH Storage Environment -40℃--105℃, 5%--95%RH

Brief Introduction  M160 module is our self-developed LoRa module. It is integrated with LoRaWAN protocol stack, compatible with LoRaWAN specification (V1.0.3, Class A/B/C) released by LoRa Alliance, which supports the connectivity function for different end devices. The module can support wide frequency band 470~510MHz or 862~923MHz. With UART interface to interchange data or command, M160 provides an easy way to access LoRaWAN network and explore wireless data applications. M160 has many features as low power, long range and high anti-interference etc, which can be used in many applications as smart metering, smart city and smart building etc。         Features • Low power consumption: minimum standby current 1.5uA • High sensitivity: reach -139dBm@SF12/125KHz • Anti-interference: high performance spread spectrum communication with efficient cycle interleaved error correction • Compliant with LoRaWAN Specification 1.0.3 • On-board LoRaWAN Class A/B/C protocol stack • UART interface, stamp hole, support parameters configuration through AT command     Applications       Specification     Specification   Description Model Model M160 Transmission Protocol LoRaWAN V1.0.3 Topology Star Device Type Class A/B/C Activation Mode OTAA/ABP Modulation CSS (Chirp Spread Spectrum) Frequency Band 470MHz/510MHz/868MHz/915MHz/923MHz Center Frequency Can be customized Bandwidth 125/250/500KHz configurable Data Rate 0.018-37.5kbps RX Power +19dBm (max) TX Sensitivity -139dBm@SF12/125KHz Interface Supply Voltage DC 3.3V (2.0-3.6V) IOs GPIO*4, UART*1, I2C*1 (Reserved) Baud Rate Of Serial Port 1200/2400/4800/9600/19200/38400/57600/115200bps, default is 9600bps Antenna Type Omni directional or Directional (Spring Antenna is recommended) Pin Encapsulation Stamp hole Dimension 15.5(L)*15(W)*2.5(H)mm (SMA connector not included） Others Operating Environment -40℃--85℃, 10%--90%RH Storage Environment -40℃--105℃, 5%--95%RH      

Brief Introduction M190 series LoRaWAN module is integrated with LoRaWAN protocol stack, compatible with LoRaWAN specification (V1.0.2, Class A/C) released by LoRa Alliance, which supports the connectivity function for different devices. The module can support wide frequency:low band 470~510MHz or high band 862~932MHz. M190 module uses ST® SOC STM32WLE5xx chip(integrated with LoRa SX1262 chip),has many features as low power, long range and high anti- interference etc, which can be used in many applications as smart metering, smart city and smart building etc。   Features • Low power consumption: minimum standby current 1.5uA • High sensitivity: up to -139dBm@SF12/125KHz • Compliant with LoRaWAN Specification 1.0.2 • Support LoRaWAN Class A/C with integration of LoRaWAN protocol stack • UART interface, stamp hole, support parameters configuration through AT command      Applications     Specification   Specification Description Model Model M190                   Transmission                     Protocol LoRaWAN V1.0.2 Topology Star Device Type Class A/C Activation Mode OTAA/ABP Modulation CSS (Chirp Spread Spectrum) Frequency Band EU433MHz/CN470MHz/EU868MHz/US915MHz/AS923MHz Center Frequency Can be customized Bandwidth 125/250/500KHz configurable Data Rate 0.018-37.5kbps RX Power +22dBm (max) TX Sensitivity -139dBm@SF12/125KHz Interface Supply Voltage DC 3.3V (2.0-3.6V) IOs GPIO*4, UART*1, I2C*1 (Reserved) Baud Rate Of Serial Port 1200/2400/4800/9600/19200/38400/57600/115200bps, default is 9600bps Antenna Interface IPEX base/Stamp hole, default is IPEX base  Antenna Type Omni directional or Directional (Spring Antenna is recommended)  

Brief Introduction The module is based on LoRa spread spectrum modulation technology, providing TTL serial port and GPIO, built-in LoRaWAN protocol. The end products embedded in this module can be configured in a quick and easy way, with the company's LoRun G500 and LoRun G300 series gateways forming a star low power WAN (LPWAN) for ultra-long distance wireless data transmission。     Features • Low power consumption: minimum standby current 3.5uA • High sensitivity: up to -143dBm@SF12/125KHz • Compliant with LoRaWAN Specification 1.0.2 • Support LoRaWAN Class A/C with integration of LoRaWAN protocol stack • UART interface, stamp hole, support parameters configuration through AT command     Applications       Specification   Model M200 Size 32*19*2.5mm(Without SMA connector) Modulation technology Linear FM Spread Spectrum Modulation CSS（chirp Spread Spectrum） Center frequency customizable Working frequency 433MHz/470MHz/510MHz/868MHz/915MHz/923MHz; Channel bandwidth 125KHz,250KHz configurable Transmission rate 0.25-50kbps RF power 20dBm（max） Receiving sensitivity -143dBm@SF12/125KHz Protocol LoRaWAN V1.0.2 Power consumption Standby 5μA@5V/3.5μ[email protected]（Class A）/10mA（Class C）； TX：130mA；RX：10 mA Operating Voltage two Two types:  DC33.3V（2.6-3.6V）(Default) DC 5V（3.5-5.5V） Coverage city 2km，suburbs 5km IO interface GPIO*3、Serial port *2 （3.3V）、PIN gap 2.54mm Antenna interface SMA Connector pad / Stamp hole pad / Through hole pad Antenna Omnidirectional / Directional, Recommended Spring Antenna, Headroom Operating temperature -40℃--85℃ Working humidity 10%--90%RH（No condensation）                                            

 Brief Introduction   G200 Series gateway is a portable indoor gateway and complies with LoRaWAN™ protocol to provide low power, stable and secure wireless connectivity for devices and sensors.   G200 adopts star topology deployment and provide WiFi, Cellular or Ethernet connection to network server. The solution is used in a wide area of applications such as smart energy, smart cities and agricultural IoT. G200 meets the network requirements of long-range communications, strong anti-interference ability, high sensitivity and low power for many dispersed nodes to provide a low cost and high reliability indoor IoT solution。     Features • 8 LoRa channels • Supports 2.4 GHz Wi-Fi AP for configuration • Receiving sensitivity up to - 137dbm • Multiple Backhaul Options:Ethernet/WiFi/Cellular • Easy Maintenance    Interface Introduction   Port 1:  LoRa Antenna (SMA-female)       Port 2: RESET Port 3:  SIM Card Slot                                  Port 4: Micro USB Port 5:  Ethernet (RJ45)                              Port 6: DC12V DC_IN Port 7:  4G/WiFi Antenna (SMA-female)     Specification   LoRa Parameters Frequency Band 470MHz/868MHz/915MHz/923MHz Communication LoRaWAN, Star Network Modulation LoRa Mode Half duplex Sensitivity -137dBm @SF12/BW 125KHz Max Transmitter Power 17 dBm (Typical) Channel & Bandwidth 125KHz/250KHz/500MHz Configurable Interface Ethernet/WiFi/4G Communication Distance Suburban 5Km, urban 3Km Physical IP Grade IP30 Size 142mm*142mm*35mm Color Off white Material PC+ABS Input Voltage DC12V(11.0 VDC ~ 14.0 VDC) Installation Desktop/Wall mount/Ceiling mount Operating Temperature 0-60℃ Operating Humidity 0-90%RH Thermal Methods Radiator grille Hardware Processor MIPS 650MHz RAM 128MB RAM Flash 16MB WiFi QCA9513 Security System System Encryption   AES128 Remote Management Upgrade and Maintenance Remote monitoring of network status Support remote firmware upgrade, configuration backup and recovery   

Brief Introduction G300 gateway is a low power consumption, low-cost, compact and portable indoor small gateway based on the LoRaWAN protocol, which is also easy to install. Applicable to: the flexible networking of terminal equipment with features of high communication requirements, strong anti-interference ability, high sensitivity, low power consumption, multiple and dispersed access node and so on. It provides users with low cost, high usage, stable and reliable solutions of indoor intelligent Internet of Things。     Features • Compact and portable, and easy to install • Realize low cost network deployment • Network stability guarantee：    (1) Node roaming. The legal node can move freely within the gateway coverage    (2) When the gateway is abnormal in the multi-gateway network, the node can be accessed through the adjacent gateway • Support the power down alarm function • Remote wireless upgrade and maintenance     Interface Introduction       Port 1: 4GAntenna               Port 2: Power connector Port 3: POE RJ45                  Port 4: COM    Port 5: SIM Card Slot           Port 6:  RESET Port 7: RF Antenna       Specification Specification Parameters Operating frequency 433MHz / 470MHz / 510MHz / 868MHz / 915MHz / 923MHz Communication protocol LoRaWAN Modulation mode LoRa/FSK Channel bandwidth 125KHz,250KHz configurable Number of channels Support 8 uplink channels, 1 down channel Receive sensitivity -140dBm  @SF12/BW   125KHz Transmitted power 24dBm(250mW)(Typical)@433MHz / 470MHz / 510MHz 23dBm(200mW)(Typical)@868MHz / 915MHz / 923MHz Transmission rate Covering radius 5Km in city, 15Km in the open Power supply DC-In 12V(11.0V14.0V) Reset management One key to restore factory settings Operating temperature range 0-60℃ Operating humidity range 0-90% RH Dimensions 160*120*28mm Structural materials and technology Aluminum, surface oxidation treatment Installation Desktop type, wall-attaching type Remote management Can check the status daily log of the device through back-stage management and remote connection Support remote upgrade and convenient system maintenance          

Brief Introduction G500 series gateway is a low power, low cost, long distance, wireless transmission IoT gateway based on LoRaWAN protocol, specially used for high communication requirements, strong anti-jamming ability, high sensitivity, low power consumption, scattered characteristics of terminal equipment, and suitable for outdoor thunderstorm weather and other characteristics.  The gateway supports multi-backhaul with Ethernet, Wi-Fi, and Cellular connectivity。     Features • IP67 industrial-grade • Supports DC 12V or PoE (802.3af)  • Receiving sensitivity up to - 140dBm • Embedded Network Server(Optional) • Compatible with Multiple Network Servers • Multiple Backhaul Options:Ethernet/Cellular     Specification   Specifications Description Physical characteristics Protection grade IP67 Structure size（H.W.D） 178mm*178mm*100mm Weight 2.2kg Color Platinum Material ADC12 aluminum Installation type   Holding pole type, Attaching wall type Working temperature -40~85℃ Working humidity 0-90% RH Heat dissipation mode Natural heat dissipation (no fan)    Electrical characteristics   Processor ARM Cortex A8/1GHz    Memory 512MB    Flash 4GB      External interface  Ethernet RJ45 YT Push buckle type  GPS antenna interface N-type waterproof joint RF Antenna Interface N-type waterproof joint    WIFI antenna interface N-type waterproof joint  4G antenna interface N-type waterproof joint Sim card slot Sim card push    USB Micro usb    COM Micro usb       Power supply   Input voltage DC-In 12 (12.0V― 14.0V)； POE IEEE 802.3af/at（max 30W）  Power management Power-off alarm   Lightning protection Earth ground copper nose terminal        GPS Positioning time service Built-in GPS module Location mode GPS, Beidou       LED indicator   Power When the power is on, the red light is always on, indicating that the power supply is normal.   STATUS Normal operation: slow flash (0.5s on, 0.5s off) System failure: Flash 2 times quickly, off   ETH   GPS The GPS is in the position state when the blue lamp flashes     4G signal intensity If RSSI < -100dBm, LED blinking cycle is 4s, on for 2s and off for 2s. If -100dBm < RSSI < -85dBm,LED blinking cycle is 2s. If -85dBm < RSSI < -75dBm,LED blinking cycle is 1s. If -75dBm < RSSI < -65dBm ,LED blinking cycle is 0.2s(fast flash). If -65dBm < RSSI< -54 dBm, LED blue light keeps on.      Operating system  Firmware Based on Linux       Protocol   Communication protocol LoRaWAN V1.0.2    Safety system Secure encryption AES128    

Brief Introduction R100 is a LoRa repeater product developed by Shenzhen EasyLinkin, which is used in conjunction with the LoRa_R module. Both R100 repeater and LoRa_R use Semtech's SX1268/2 chip, support Standard LoRaWAN and proprietary protocols, and the two communication protocols can switch automatically without manual operation. Working in Class A mode, it has the characteristics of lower power consumption, higher transmit power, longer transmission distance, stronger anti-interference ability, etc. It is widely used in low-power IoT terminal sensor application scenarios, especially water meters, smoke detectors, Temperature and humidity, pressure gauges and other products that use battery power。       Features • Low power consumption, battery powered, heartbeat power reporting, maintenance-free during the life cycle • High sensitivity: the highest receiving sensitivity can reach -139dBm@SF12/125KHz • Anti-interference: high-performance spread spectrum communication, and efficient cyclic interleaving error correction • Support LoRaWAN protocol stack, support Class A device type • IP68 ABS waterproof housing, easy to install and maintain, and it can work when powered on • 25Ah CR battery pack, more than 50 forwarding times per day, can work for more than 10 years     Interface Introduction     Port 1:  shell screw  x6                               Port 2: top shell Port 3:  top shell                                        Port 4: Antenna Port 5:  waterproof gasket                         Port 6: bottom shel Port 7:  installation hole x2       Specification Item Parameter Model Model R100-L/H Transmission characteristics Protocol version Standard LoRaWAN and Proprietary Protocols Net topology Star Device type Class A / LoRa_R Mode OTAA Modulation technology CSS(chirp Spread Spectrum) Frequency 470MHz/868MHz/915MHz/923MHz Channel bandwidth 125/250/500kHz is configurable Transmission speed 0.018-37.5kbps RF Power +22dBm（max） Receiving sensitivity -139dBm@SF12/125KHz Interface features Voltage DC 3.3V（2.0-3.6V） External Interface SMA antenna Antenna omnidirectional Dimension 152.5 (L) * 90 (W) * 26 (H) mm (excluding antenna) other Work environment -40℃ - -70℃, 10% - -90%RH (no condensation) Storage environment -40℃ - -70℃, 5% - -95%RH (no condensation)