Brief Introduction
M100 series module is based on LoRa spread spectrum modulation technology, providing TTL serial port and GPIO, built-in LoRaWAN protocol. The end products embedded in this module can be configured in a quick and easy way, with the gateways forming a star low power WAN (LPWAN) for ultra-long distance wireless data transmission。
Features
• Low power consumption: minimum standby current 3.5uA
• High sensitivity: up to -143dBm@SF12/125KHz
• Compliant with LoRaWAN Specification 1.0.2
• Support LoRaWAN Class A/C with integration of LoRaWAN protocol stack
• UART interface, stamp hole, support parameters configuration through AT command
Applications
Specification
Model |
M100 |
Size |
32*19*2.5mm(Without SMA connector) |
Modulation technology |
Linear FM Spread Spectrum Modulation CSS(chirp Spread Spectrum) |
Center frequency |
customizable |
Working frequency |
433MHz/470MHz/510MHz/868MHz/915MHz/923MHz; |
Channel bandwidth |
125KHz,250KHz configurable |
Transmission rate |
0.25-50kbps |
RF power |
20dBm(max) |
Receiving sensitivity |
-143dBm@SF12/125KHz |
Protocol |
LoRaWAN V1.0.2 |
Power consumption |
Standby 5μA@5V/3.5μ[email protected](Class A)/10mA(Class C); TX:130mA;RX:10 mA |
Operating Voltage |
DC3.3V(2.6-3.6V) |
Coverage |
city 2km,suburbs 5km |
IO interface |
GPIO*3、Serial port *2 (3.3V)、PIN gap 2.54mm |
Antenna interface |
SMA Connector pad / Stamp hole pad / Through hole pad |
Antenna |
Omnidirectional / Directional, Recommended Spring Antenna, Headroom |
Operating temperature |
-40℃--85℃ |
Working humidity |
10%--90%RH(No condensation) |