Brief Introduction
M190 series LoRaWAN module is integrated with LoRaWAN protocol stack, compatible with LoRaWAN specification (V1.0.2, Class A/C) released by LoRa Alliance, which supports the connectivity function for different devices. The module can support wide frequency:low band 470~510MHz or high band 862~932MHz.
M190 module uses ST® SOC STM32WLE5xx chip(integrated with LoRa SX1262 chip),has many features as low power, long range and high anti- interference etc, which can be used in many applications as smart metering, smart city and smart building etc。
Features
• Low power consumption: minimum standby current 1.5uA
• High sensitivity: up to -139dBm@SF12/125KHz
• Compliant with LoRaWAN Specification 1.0.2
• Support LoRaWAN Class A/C with integration of LoRaWAN protocol stack
• UART interface, stamp hole, support parameters configuration through AT command
Applications
Specification
Specification |
Description |
||
Model | Model | M190 | |
Transmission
|
Protocol |
LoRaWAN V1.0.2 |
|
Topology |
Star |
||
Device Type |
Class A/C |
||
Activation Mode |
OTAA/ABP |
||
Modulation |
CSS (Chirp Spread Spectrum) |
||
Frequency Band |
EU433MHz/CN470MHz/EU868MHz/US915MHz/AS923MHz |
||
Center Frequency |
Can be customized |
||
Bandwidth |
125/250/500KHz configurable |
||
Data Rate |
0.018-37.5kbps |
||
RX Power |
+22dBm (max) |
||
TX Sensitivity |
-139dBm@SF12/125KHz |
||
Interface |
Supply Voltage |
DC 3.3V (2.0-3.6V) |
|
IOs |
GPIO*4, UART*1, I2C*1 (Reserved) |
||
Baud Rate Of Serial Port |
1200/2400/4800/9600/19200/38400/57600/115200bps, default is 9600bps |
||
Antenna Interface | IPEX base/Stamp hole, default is IPEX base | ||
Antenna Type |
Omni directional or Directional (Spring Antenna is recommended) |