Brief Introduction M100 series module is based on LoRa spread spectrum modulation technology, providing TTL serial port and GPIO, built-in LoRaWAN protocol. The end products embedded in this module can be configured in a quick and easy way, with the gateways forming a star low power WAN (LPWAN) for ultra-long distance wireless data transmission。       Features • Low power consumption: minimum standby current 3.5uA • High sensitivity: up to -143dBm@SF12/125KHz • Compliant with LoRaWAN Specification 1.0.2 • Support LoRaWAN Class A/C with integration of LoRaWAN protocol stack • UART interface, stamp hole, support parameters configuration through AT command     Applications       Specification   Model M100 Size 32*19*2.5mm(Without SMA connector) Modulation technology Linear FM Spread Spectrum Modulation CSS（chirp Spread Spectrum） Center frequency customizable Working frequency 433MHz/470MHz/510MHz/868MHz/915MHz/923MHz; Channel bandwidth 125KHz,250KHz configurable Transmission rate 0.25-50kbps RF power 20dBm（max） Receiving sensitivity -143dBm@SF12/125KHz Protocol LoRaWAN V1.0.2 Power consumption Standby 5μA@5V/3.5μ[email protected]（Class A）/10mA（Class C）； TX：130mA；RX：10 mA Operating Voltage DC3.3V（2.6-3.6V） Coverage city 2km，suburbs  5km IO interface GPIO*3、Serial port *2 （3.3V）、PIN gap 2.54mm Antenna interface SMA Connector pad / Stamp hole pad / Through hole pad Antenna Omnidirectional / Directional, Recommended Spring Antenna, Headroom Operating temperature -40℃--85℃ Working humidity 10%--90%RH（No condensation）                                      

Brief Introduction M190 series LoRaWAN module is integrated with LoRaWAN protocol stack, compatible with LoRaWAN specification (V1.0.2, Class A/C) released by LoRa Alliance, which supports the connectivity function for different devices. The module can support wide frequency:low band 470~510MHz or high band 862~932MHz. M190 module uses ST® SOC STM32WLE5xx chip(integrated with LoRa SX1262 chip),has many features as low power, long range and high anti- interference etc, which can be used in many applications as smart metering, smart city and smart building etc。       Features • Low power consumption: minimum standby current 3.5uA • High sensitivity: up to -139dBm@SF12/125KHz • High sensitivity: up to -139dBm@SF12/125KHz • Support LoRaWAN Class A/B/C with integration of LoRaWAN protocol stack • UART interface, stamp hole, support parameters configuration through AT command     Applications       Specification     Specification   Description Model Model M120 Transmission Protocol LoRaWAN V1.0.2 Topology Star Device Type Class A/Class C Activation Mode OTAA/ABP Modulation CSS (Chirp Spread Spectrum) Frequency Band 470MHz/510MHz/868MHz/915MHz/923MHz Center Frequency Can be customized Bandwidth 125/250/500KHz configurable Data Rate 0.018-37.5kbps RX Power +19dBm (max) TX Sensitivity -139dBm@SF12/125KHz Interface Supply Voltage DC 3.3V (2.0-3.6V) IOs GPIO*4, UART*1, I2C*1 (Reserved) Baud Rate Of Serial Port 1200/2400/4800/9600/19200/38400/57600/115200bps, default is 9600bps Antenna Interface IPEX base/Stamp hole, default is IPEX base   Antenna Type Omni directional or Directional (Spring Antenna is recommended) Pin Encapsulation Stamp hole Dimension 15.5(L)*15(W)*2.5(H)mm (SMA connector not included） Others   Operating Environment -40℃--85℃, 10%--90%RH Storage Environment -40℃--105℃, 5%--95%RH      

Brief Introduction M130 series LoRaWAN module is integrated with LoRaWAN protocol stack, compatible with LoRaWAN specification (V1.0.2, Class A/C) released by LoRa Alliance, which supports the connectivity function for different devices. The module can support wide frequency:low band 470~510MHz or high band 862~932MHz. The module uses a TTL serial port for data/command interaction with external devices, which can easily provide users with fast LoRaWAN network access and wireless data service applications. M130 module has low power consumption, long transmission distance, and strong anti-interference ability, and is suitable for a variety of applications: IoT low-power terminal applications, automatic meter reading, smart cities, industrial automation, smart homes, etc。       Features • Low power consumption: minimum standby current 1.5uA • High sensitivity: up to -139dBm@SF12/125KHz • Compliant with LoRaWAN Specification 1.0.2 • Support LoRaWAN Class A/C with integration of LoRaWAN protocol stack • UART interface, stamp hole, support parameters configuration through AT command     Applications       Specification     Specification Description Appearance Model M130                   Transmission                     Protocol LoRaWAN V1.0.2 Topology Star Device Type Class A/C Activation Mode OTAA/ABP Modulation CSS (Chirp Spread Spectrum) Frequency Band EU433MHz/CN470MHz/EU868MHz/US915MHz/AS923MHz Center Frequency Can be customized Bandwidth 125/250/500KHz configurable Data Rate 0.018-37.5kbps Transmit Power +20dBm (max)on PA_BOOST（max） TX Sensitivity -139dBm@SF12/125KHz           Interface             Supply Voltage DC 3.3V (2.0-3.6V) IOs GPIO*4, UART*1, I2C*1 (Reserved) Baud Rate Of Serial Port 1200/2400/4800/9600/19200/38400/57600/115200bps, default is 9600bps Antenna Interface   IPEX base/Stamp hole, default is IPEX base Antenna Type Omni directional or Directional (Spring Antenna is recommended) Pin Encapsulation Stamp hole Dimension 15.5(L)*15(W)*2.5(H)mm (SMA connector not included） Others Operating Environment -40℃--85℃, 10%--90%RH Storage Environment -40℃--105℃, 5%--95%RH

Brief Introduction  M160 module is our self-developed LoRa module. It is integrated with LoRaWAN protocol stack, compatible with LoRaWAN specification (V1.0.3, Class A/B/C) released by LoRa Alliance, which supports the connectivity function for different end devices. The module can support wide frequency band 470~510MHz or 862~923MHz. With UART interface to interchange data or command, M160 provides an easy way to access LoRaWAN network and explore wireless data applications. M160 has many features as low power, long range and high anti-interference etc, which can be used in many applications as smart metering, smart city and smart building etc。         Features • Low power consumption: minimum standby current 1.5uA • High sensitivity: reach -139dBm@SF12/125KHz • Anti-interference: high performance spread spectrum communication with efficient cycle interleaved error correction • Compliant with LoRaWAN Specification 1.0.3 • On-board LoRaWAN Class A/B/C protocol stack • UART interface, stamp hole, support parameters configuration through AT command     Applications       Specification     Specification   Description Model Model M160 Transmission Protocol LoRaWAN V1.0.3 Topology Star Device Type Class A/B/C Activation Mode OTAA/ABP Modulation CSS (Chirp Spread Spectrum) Frequency Band 470MHz/510MHz/868MHz/915MHz/923MHz Center Frequency Can be customized Bandwidth 125/250/500KHz configurable Data Rate 0.018-37.5kbps RX Power +19dBm (max) TX Sensitivity -139dBm@SF12/125KHz Interface Supply Voltage DC 3.3V (2.0-3.6V) IOs GPIO*4, UART*1, I2C*1 (Reserved) Baud Rate Of Serial Port 1200/2400/4800/9600/19200/38400/57600/115200bps, default is 9600bps Antenna Type Omni directional or Directional (Spring Antenna is recommended) Pin Encapsulation Stamp hole Dimension 15.5(L)*15(W)*2.5(H)mm (SMA connector not included） Others Operating Environment -40℃--85℃, 10%--90%RH Storage Environment -40℃--105℃, 5%--95%RH      

Brief Introduction M190 series LoRaWAN module is integrated with LoRaWAN protocol stack, compatible with LoRaWAN specification (V1.0.2, Class A/C) released by LoRa Alliance, which supports the connectivity function for different devices. The module can support wide frequency:low band 470~510MHz or high band 862~932MHz. M190 module uses ST® SOC STM32WLE5xx chip(integrated with LoRa SX1262 chip),has many features as low power, long range and high anti- interference etc, which can be used in many applications as smart metering, smart city and smart building etc。   Features • Low power consumption: minimum standby current 1.5uA • High sensitivity: up to -139dBm@SF12/125KHz • Compliant with LoRaWAN Specification 1.0.2 • Support LoRaWAN Class A/C with integration of LoRaWAN protocol stack • UART interface, stamp hole, support parameters configuration through AT command      Applications     Specification   Specification Description Model Model M190                   Transmission                     Protocol LoRaWAN V1.0.2 Topology Star Device Type Class A/C Activation Mode OTAA/ABP Modulation CSS (Chirp Spread Spectrum) Frequency Band EU433MHz/CN470MHz/EU868MHz/US915MHz/AS923MHz Center Frequency Can be customized Bandwidth 125/250/500KHz configurable Data Rate 0.018-37.5kbps RX Power +22dBm (max) TX Sensitivity -139dBm@SF12/125KHz Interface Supply Voltage DC 3.3V (2.0-3.6V) IOs GPIO*4, UART*1, I2C*1 (Reserved) Baud Rate Of Serial Port 1200/2400/4800/9600/19200/38400/57600/115200bps, default is 9600bps Antenna Interface IPEX base/Stamp hole, default is IPEX base  Antenna Type Omni directional or Directional (Spring Antenna is recommended)  

Brief Introduction The module is based on LoRa spread spectrum modulation technology, providing TTL serial port and GPIO, built-in LoRaWAN protocol. The end products embedded in this module can be configured in a quick and easy way, with the company's LoRun G500 and LoRun G300 series gateways forming a star low power WAN (LPWAN) for ultra-long distance wireless data transmission。     Features • Low power consumption: minimum standby current 3.5uA • High sensitivity: up to -143dBm@SF12/125KHz • Compliant with LoRaWAN Specification 1.0.2 • Support LoRaWAN Class A/C with integration of LoRaWAN protocol stack • UART interface, stamp hole, support parameters configuration through AT command     Applications       Specification   Model M200 Size 32*19*2.5mm(Without SMA connector) Modulation technology Linear FM Spread Spectrum Modulation CSS（chirp Spread Spectrum） Center frequency customizable Working frequency 433MHz/470MHz/510MHz/868MHz/915MHz/923MHz; Channel bandwidth 125KHz,250KHz configurable Transmission rate 0.25-50kbps RF power 20dBm（max） Receiving sensitivity -143dBm@SF12/125KHz Protocol LoRaWAN V1.0.2 Power consumption Standby 5μA@5V/3.5μ[email protected]（Class A）/10mA（Class C）； TX：130mA；RX：10 mA Operating Voltage two Two types:  DC33.3V（2.6-3.6V）(Default) DC 5V（3.5-5.5V） Coverage city 2km，suburbs 5km IO interface GPIO*3、Serial port *2 （3.3V）、PIN gap 2.54mm Antenna interface SMA Connector pad / Stamp hole pad / Through hole pad Antenna Omnidirectional / Directional, Recommended Spring Antenna, Headroom Operating temperature -40℃--85℃ Working humidity 10%--90%RH（No condensation）